Wie installiere ich das Ultrassist-Modell für die weibliche Katheterisierung?

Step 1: Install the ABS Stand and hang the liquid supply bag.

Step 2: Connect the tube to the reservoir bottle and the three-way stop-cock.

Note: For first-time use, rub Vaseline throughout the catheter and poke the water bulb with a catheter to open the reservoir bottle's valve.

Step 3: The white switch points towards the side with the tubing and pour 100ml of liquid into the reservoir bottle.

Step 4: Insert the reservoir bottle into the female catheterization model bis es nicht mehr weiter eingeschoben werden kann.

Step 5: Close the stopcock on the tubing side. Attach a 60cc syringe to the three-way stop-cock and inject liquid into the liquid supply bag.

Note: Before detaching the syringe from the stopcock, close the stopcock on the syringe side.

Step 6: Repeat step 5 for injecting more liquid.

Step 7: Once the Fluid Supply Bag is filled full, place the white cap onto the outlet of the three-way Stop-cock.

Beginnen Sie mit der professionellen Ausbildung und werden Sie in der männlichen oder weiblichen Katheterisierung ausgezeichnet.