Ultrassist Male Catheterization Simulator Installation Guide

Simple and clear product instructions make male urethral catheterization simulator setup easy and ensure that users can start catheterization training sessions quickly.

Step 1: Install the ABS Stand and hang the liquid supply bag.

Step 2: Connect the tube to the reservoir bottle and the three-way stop-cock.

Note: For first-time use, poke the water bulb with the catheter to open the valve of the reservoir bottle.

Step 3: The white switch points towards the side with the tubing and pour 100ml of liquid into the reservoir bottle.

Step 4: Insert the reservoir bottle into the male catheterization trainer until it can’t be inserted any further.

Step 5: Close the stopcock on the tubing side. Attach a 60cc syringe to the three-way stop-cock and inject liquid into the liquid supply bag.

Note: Before detaching the syringe from the stopcock, close the stopcock on the syringe side.

Step 6: Repeat step 5 for injecting more liquid.

Step 7: Once the Fluid Supply Bag is filled full, place the white cap onto the outlet of the three-way Stop-cock.

Watch: Setting Up Your Male Catheterization Practice Simulator

Start professional training, and become excellent in male or female catheterization.

Practice Male/Female Urethral Catheterization

Related Articles:

• Ultrassist Female Catheterization Model Installation Guide