Agregado al carrito:

Guía de instalación del modelo de cateterismo femenino Ultrassist

5 ene 2024 Ultrassist

Step 1: Install the ABS Stand and hang the liquid supply bag.

Step 2: Connect the tube to the reservoir bottle and the three-way stop-cock.

Note: For first-time use, rub Vaseline throughout the catheter and poke the water bulb with a catheter to open the reservoir bottle's valve.

Step 3: The white switch points towards the side with the tubing and pour 100ml of liquid into the reservoir bottle.

Step 4: Insert the reservoir bottle into the female catheterization model hasta que no se pueda insertar más.

Step 5: Close the stopcock on the tubing side. Attach a 60cc syringe to the three-way stop-cock and inject liquid into the liquid supply bag.

Note: Before detaching the syringe from the stopcock, close the stopcock on the syringe side.

Step 6: Repeat step 5 for injecting more liquid.

Step 7: Once the Fluid Supply Bag is filled full, place the white cap onto the outlet of the three-way Stop-cock.

 

Mire: Modelo de Cateterismo Femenino – Tutorial de Configuración Simple

 

Comience la capacitación profesional y conviértase en excelente en el cateterismo masculino o femenino.

Práctica de Cateterismo Uretral Masculino/Femenino

Ultrassist Male Catheterization Simulator

Ultrassist Female Catheterization Model

Artículos Relacionados:

Volver al blog

Publicar comentario

Tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados

Explorar productos relacionados

  • Modelos de inyección

  • Modelos de mama

  • Modelos de boca

  • Modelos de educación para la salud

  • Simuladores médicos