Cómo instalar el simulador de cateterización masculina Ultrassist

Simple and clear product instructions make simulador de cateterismo uretral masculino setup easy and ensure that users can start catheterization training sessions quickly.

Step 1: Install the ABS Stand and hang the liquid supply bag.

Step 2: Connect the tube to the reservoir bottle and the three-way stop-cock.

Note: For first-time use, poke the water bulb with the catheter to open the valve of the reservoir bottle.

Step 3: The white switch points towards the side with the tubing and pour 100ml of liquid into the reservoir bottle.

Step 4: Insert the reservoir bottle into the male catheterization trainer hasta que ya no se pueda insertar más.

Step 5: Close the stopcock on the tubing side. Attach a 60cc syringe to the three-way stop-cock and inject liquid into the liquid supply bag.

Note: Before detaching the syringe from the stopcock, close the stopcock on the syringe side.

Step 6: Repeat step 5 for injecting more liquid.

Step 7: Once the Fluid Supply Bag is filled full, place the white cap onto the outlet of the three-way Stop-cock.

Comienza la formación profesional y conviértete en un experto en cateterización masculina o femenina.

Practique el cateterismo uretral masculino/femenino